Archive for the 'Construction Equipment & Supplies' Category
Apr
6
Cementitious Resurfacer offers 70-minute pot life.
April 6, 2016 | Comments Off on Cementitious Resurfacer offers 70-minute pot life.
Containing Part A Epoxy, Part B Hardener, and Part C Mortar, Dura-Plate® 2300 patches and fills voids and bugholes in concrete and masonry structures. Water-based product provides hard surface with optimized adhesion that minimizes potential for pin-holing and outgassing problems typically associated with coating concrete. Dura-Plate 2300 can be dry to touch in 3–4 hours and cures for immersion in 12 hours at 75°F. Offered in flat concrete gray, product can be applied at minimum of…
This story is related to the following:
Search for suppliers of: Cement & Concrete Coatings | Floor Patching & Resurfacing Materials | Brick, Concrete & Masonry Fillers | Masonry Coatings
Mar
9
Bolt-On Kits endow snow pushers with pull back capability.
March 9, 2016 | Comments Off on Bolt-On Kits endow snow pushers with pull back capability.
Pull-back kits, available for 36-Series Snow Pushers, let operators rotate snow pusher forward as to engage 1.5 x 8 in. Ultra-rubber cutting edge with ground to pull snow away from overhead doors, buildings, and loading docks. This capability also minimizes hand shoveling. Featuring bolt-on installation, kits use existing holes on end plates to eliminate need for any additional drilling. Cutting edge is made of SBR (Styrene Butadiene Rubber) with 65 durometer and 2,500 lb tensile strength.
This story is related to the following:
Construction Equipment and Supplies
Search for suppliers of: Lift Truck Attachments | Wheeled Loader Attachments
Mar
9
Bolt-On Kits endow snow pushers with pull back capability.
March 9, 2016 | Comments Off on Bolt-On Kits endow snow pushers with pull back capability.
Pull-back kits, available for 36-Series Snow Pushers, let operators rotate snow pusher forward as to engage 1.5 x 8 in. Ultra-rubber cutting edge with ground to pull snow away from overhead doors, buildings, and loading docks. This capability also minimizes hand shoveling. Featuring bolt-on installation, kits use existing holes on end plates to eliminate need for any additional drilling. Cutting edge is made of SBR (Styrene Butadiene Rubber) with 65 durometer and 2,500 lb tensile strength.
This story is related to the following:
Search for suppliers of: Lift Truck Attachments | Wheeled Loader Attachments
Mar
9
Bolt-On Kits endow snow pushers with pull back capability.
March 9, 2016 | Comments Off on Bolt-On Kits endow snow pushers with pull back capability.
Pull-back kits, available for 36-Series Snow Pushers, let operators rotate snow pusher forward as to engage 1.5 x 8 in. Ultra-rubber cutting edge with ground to pull snow away from overhead doors, buildings, and loading docks. This capability also minimizes hand shoveling. Featuring bolt-on installation, kits use existing holes on end plates to eliminate need for any additional drilling. Cutting edge is made of SBR (Styrene Butadiene Rubber) with 65 durometer and 2,500 lb tensile strength.
This story is related to the following:
Search for suppliers of: Lift Truck Attachments | Wheeled Loader Attachments
Feb
25
Form Systems and Wall Panel offer sanitary surfaces.
February 25, 2016 | Comments Off on Form Systems and Wall Panel offer sanitary surfaces.
Suitable for sanitizing on daily basis, added products include EFS-8 Extrutech Form System for 8, 10, and 12 in. concrete walls; EFSI-8 Extrutech Form System for Insulated concrete walls; P224 Wall Panel for interior partition walls and clean rooms; and P645 Angle Form Connector for construction of concrete circular and oval storage tanks or above/below ground swimming pools. Waterproof products offer bright white, non-porous surface that resists rust, damage, and corrosion.
This story is related to the following:
Construction Equipment and Supplies
Materials and Material Processing
Architectural and Civil Engineering Products
Search for suppliers of: Concrete Forms | Plastic Panels | Concrete Panels | Plastic Wall Panels | Wall Panels | Plastic Connectors
Feb
9
PTO Trucks suit vacuum excavation applications.
February 9, 2016 | Comments Off on PTO Trucks suit vacuum excavation applications.
Available on Ford or Freightliner chassis, HTV PTO Hydro Truck Vac Series features debris tanks ranging from 300–1,500 gallons. Power Take Off drives positive displacement vacuum blowers that produce 1,000–2,600 cfm. Units are standard with high pressure water system, full hydraulic rear claw door, reverse pressure, and Big Red filter housing that cleans air down to 0.5 microns before it passes back through vacuum pump. Air compressors and hydraulic booms are also available on most…
This story is related to the following:
Construction Equipment and Supplies
Search for suppliers of: Vacuum Excavators