Archive for the 'Press Releases' Category
Mar
25
Horizontal Sidewall Sprinkler features 3.0 K-factor.
March 25, 2016 | Comments Off on Horizontal Sidewall Sprinkler features 3.0 K-factor.
Supporting coverage areas up to 16 ft², Model VK479 is suited for residential systems where available water supply is limited. Unit has ½ in. NPT thread size and temperature rating of 155°F. In addition to several standard finishes, d…
Mar
25
Inertial Shaker produces up to 2 lbf peak sine force.
March 25, 2016 | Comments Off on Inertial Shaker produces up to 2 lbf peak sine force.
Producing up to 2 lbf peak sine force over 20–3,000 Hz frequency range, 2002E Miniature Electrodynamic Inertial Shaker is attached either directly to test structure, through PCB Model 288D01 Impedance Head, or through PCB Model 208C Series Forc…
Mar
25
Step Down Spider Box provides 6 duplex 120 V outlets.
March 25, 2016 | Comments Off on Step Down Spider Box provides 6 duplex 120 V outlets.
Providing source of 120 V power when only 240 V is available, Model WALSB-240.50A-6X120.20A-WP is equipped with 10 ft chemical- and abrasion-resistant cable terminated in industrial male cord cap that carries 240 V current to box, which is then stepp…
Mar
25
Flexure-Based Galvanometer is suited for laser applications.
March 25, 2016 | Comments Off on Flexure-Based Galvanometer is suited for laser applications.
Able to be used in small angle applications, Harmonic Scan-15 (HS-15) moving-magnet galvo scanner uses galvanometer mirrors with 7, 10, and 15 mm apertures and can achieve scan rates of 900 Hz at small angles (1°), 500 Hz at medium angles (1…
Mar
25
Class 2 Transformers suit lighting control applications.
March 25, 2016 | Comments Off on Class 2 Transformers suit lighting control applications.
Accepting input voltages of 120/240/277/347 V, Model 16392 Transformers deliver 24 V output at 50/60 Hz with 50 VA capacity. Compact size allows units to fit into new or existing panels, while optimized design allows them to withstand direct short ci…
Mar
25
Cutter Build Inspection Machine increases accuracy via automation.
March 25, 2016 | Comments Off on Cutter Build Inspection Machine increases accuracy via automation.
With automated closed-loop blade positioning, 500CB delivers accurate and automated build, truing, and inspection of all types of stick-blade bevel gear cutters. Solution also automatically controls tightening of blade clamp screws by consistent…